Choosing the Right Contractor for Your Spray-On Roofing Coating Project

If your commercial roof is beginning to show signs of aging, you may think that replacing the entire roof is the only solution. However, that can be an expensive project with significant disruption to your tenants and employees.

 

Instead, consider a spray-on silicone restoration membrane to stop leaks and save energy costs. This type of roofing coating is similar to thick paint and can be applied without a tear-off.

1. Experience

The roof on a building takes more of a beating than many property owners realize. From the sun’s rays to changing temperatures, roof damage can cause a variety of problems. Choosing the right contractor for a roof repair project is essential for ensuring that future problems are avoided and that the structure stays strong.

 

One of the most cost-effective and efficient ways to protect a commercial roof is with spray on roofing coating protection. These coatings add a layer of protection that can prevent future issues and extend the lifespan of a roof. When deciding between contractors for roof coating, it is important to choose a company with experience in spray foam technology and a history of successful projects.

 

A qualified roof coating contractor should be able to provide case studies and testimonials from past clients. A roof coating contractor should also be able to answer questions about the type of roofing structures they have worked on and what size of a roof they can handle.

 

Before a spray foam roof can be applied, the existing roofing system must be inspected and cleaned to ensure that it is ready for the coating. Most of the time, this is done by conducting an interior and exterior inspection and infrared inspection. This is a great way to determine whether an existing roof qualifies for a restorative coating and can eliminate the need for a complete tear-off.

 

2. Warranty

A roof takes much more of a beating than most property owners realize. From the sun’s harsh UV rays to fluctuating weather and intense storms, a commercial structure’s roof is vulnerable to damage that threatens the integrity of the building below.

 

The right spray-on roofing contractor can strengthen a roof to help protect the structures and people below from damaging leaks, structural issues, and mold growth. They can also enhance the insulation value of an existing roof to reduce energy costs.

 

To get the most out of your investment, look for a coating contractor that offers an extended warranty on their work. This will give you peace of mind that the contractor stands by their quality and craftsmanship. Ask the contractor about their experience working with insurance companies on claims and what they do to provide customers with a smooth repair process.

 

A comprehensive warranty is a sign of the contractor’s dedication to their work and customers. A well-written warranty will detail what is and is not covered, including the length of time the roof is warranted against defects.

 

If you’re interested in restoring your current roof system with a spray coating, be sure to schedule an inspection to determine if your structure is eligible. Then, a qualified contractor can perform the required repairs and apply the silicone membrane coating.

3. Reputation

Reputation is one of the strongest forces in humankind. It is what draws customers to products, investors to securities and employees to jobs. Unfortunately, reputation isn’t always based on fact. The belief that Nessie is real, for example, doesn’t necessarily reflect the Loch’s verifiable existence.

 

Similarly, a spray-on roofing contractor’s reputation doesn’t necessarily reflect the company’s character. The word “character” may evoke images of morality, but it actually refers to an individual’s traits and values.

 

A savvy way to gauge a spray-on roofing contractor’s character is by asking for recommendations from local businesses and residents. These references can reveal both praise and complaints that may not make it into the mass media.

 

Then there is the matter of a contractor’s track record. It is important to find out how many of the company’s projects have been completed on time and within budget. Repeat work demonstrates that the contractor is reliable, trustworthy and capable.

 

Finally, a company with a solid reputation like Bullet Liner (bulletliner.com) will be able to deliver on its promises. Choosing a contractor that can install energy-saving roof coatings will result in lower utility bills and an improved ability to control climate. For business owners, efficiency isn’t just a buzzword; it’s a necessity that can lead to long-term profitability. As a result, it is worth paying a premium for the peace of mind that comes with a good reputation.

 

4. Pricing

The pricing of a roof coating project can be complicated. This is because the material itself can vary in price from product to product. Additionally, labor is another factor that influences the cost. For example, the amount of time and effort needed to clean and prepare the surface for application of spray polyurethane foam will increase the final cost. Moisture related labor, such as removing saturated areas of the roof, is also an important consideration that can affect the overall cost.

 

A spray on roof coating is a sealant that’s applied to an existing roof to create a protective layer. This can restore the structure and improve its performance. This type of roof restoration is a viable option for structures that need intensive care but aren’t ready for a complete tear-off.

 

When selecting a roof coating contractor, look for one who offers competitive prices that are aligned with the value of the work being performed. A less expensive contractor may seem appealing at first, but they could end up costing you more in the long run if they cut corners or make mistakes that can have costly implications.

 

The best way to compare the pricing of contractors is to request detailed written estimates from multiple companies. This will allow you to see the scope of work, materials and labor costs in comparison. Additionally, a reputable contractor will be transparent about project timelines and costs throughout the entire process.

Business

How to Prep Your Garage Floor For Epoxy

Nine out of ten times an epoxy floor coating fails because of poor surface preparation. Proper prep is crucial to ensure that the chemicals in the epoxy can create permanent chemical bonds with the concrete.

 

Start with removing vehicles, boxes and furniture from the garage floor. Then clean the entire garage floor with a degreaser, being sure to get into all corners and seams.

 

Clean the Concrete

Whether you’re preparing your garage floor for epoxy yourself or have hired a company to do it for you, the first step is cleaning and rinsing the concrete. This ensures that any cleaning agents, dust, soap, or dirt is washed away before you move on to roughing the surface. It also helps to ensure that the concrete is completely dry before you apply any coatings. If it isn’t, the epoxy could crack or peel later.

 

The next step is a deep cleaning, which you can do either by acid etching or grinding. Both processes are effective, but acid etching is the cheaper option since it doesn’t require expensive machinery. Either way, make sure that you remove anything you don’t want to get covered in dust and that you cover any items on shelves or walls with plastic sheets to protect them from dust.

 

You should also take this opportunity to inspect the concrete floor for any sunken areas or settlement. These should be lifted with concrete leveling before applying the epoxy, and it’s a good idea to do so even if you’re not planning on changing the floors anytime soon.

 

Moisture wreaks havoc on epoxy flooring, and you don’t want to start your new installation off with a failure. Before you apply the epoxy, check for moisture by putting down a piece of plastic and observing if there’s any condensation on it or if the underside of the plastic has a dark spot.

 

Acid Etch the Concrete

Your garage floor must be free of dust, dirt, grime and oils in order for epoxy resin to properly bond with it. Oils, dirt and dust create a barrier that prevents the chemicals in epoxy from making permanent chemical bonds with the concrete surface.

 

To remove these contaminants, etching the concrete is essential. This can be accomplished in one of two ways; either by grinding the surface or by applying an acid etching solution. Both methods result in a slightly rougher floor, which is better for epoxy adhesion.

 

When using an acid etching product, follow the manufacturer’s directions to properly mix the solution. Then, use a hose to wet the floor and apply it evenly across the area. It is important that the entire surface of the concrete be wet — not just where you plan to apply the etching solution. Once applied, the acid will begin to bubble. Wait until the bubbles stop to know that the floor is etched and ready for application of your epoxy coating.

 

After the etching is complete, rinse the concrete with a hose and clean up all of the rinse water with a broom or squeegee. Be sure to suck up any remaining rinse water with a shop vacuum to ensure it is not contaminated by the acids you used.

 

Primer the Concrete

A floor epoxy primer will provide a bonding surface that ensures your next coating, such as an epoxy garage floor coating or PU cast concrete floor, adheres well. This helps to reduce the consumption of your epoxy floor coating and improves its durability. It also minimizes moisture vapor emissions.

 

Moisture vapor can cause your epoxy to degrade or not cure properly. A primer designed to reduce moisture vapor emissions will help prevent this from occurring.

 

There are many different types of concrete primers to choose from, but it is important that you select one that is suitable for your project and that it meets the requirements for your environment. For example, if you are working in an area that will be exposed to various chemicals, it is important to use a chemical resistant epoxy primer.

 

Once your floor primer is mixed, it needs to be applied to the surface that you will be coating. Depending on the type of primer you are using, this can be done with a roller, brush, or sprayer. It is important to follow the manufacturer’s recommendations when applying the primer.

 

Prep the Walls

Proper concrete surface preparation is one of the most important aspects of obtaining long lasting epoxy adhesion to the garage floor. If there are oils, dirt, stains, or dust on the surface of the concrete, epoxy will not be able to create a permanent chemical bond with the underlying concrete.

 

Use a degreaser to clean the walls of your garage before applying an epoxy coating. Follow the directions on the degreaser formula you purchased for best results. Make sure your garage is well ventilated throughout this step to avoid any fumes from the chemicals.

 

Once the concrete is ready for epoxy, you can apply a coat of primer. It is recommended that you use a moisture seal epoxy primer. Moisture seal is formulated to penetrate deep into the concrete, allowing it to form a strong, long-lasting bond with the floor. Mix the material according to the manufacturer’s instructions. For best results, a drill and paddle mixer are recommended, but a paint stick may be used as well.

 

After the primer has been thoroughly mixed, you can begin applying the epoxy on the garage floor. It is recommended that you work in 10 by 10-foot sections to prevent any over-application. During the application process, keep the garage area well-ventilated to avoid any fumes or over-application. Once the epoxy is completely cured, you can move your cars into the garage and enjoy your newly coated floor.

Home Improvement